|
SUPPORT PAGES - AMSTRAD CPC 464 DISK DRIVE PROBLEMS
Select the problem you're having from the list below:
The drive belt is not properly attached or has come off completely - re-attach the drive belt or fit a replacement (but first try a different disk in the drive!) See the Change DDI or FD01 Belt page in the projects section for information.
Check that the power cable and parallel cable is attached and also that you have plugged in the drive power cable in the front of the monitor.
Problem is probably not with the drive belt. Read heads may need aligning - check the projects page for information.
The parallel cable has been re-attached the wrong way round! Re-attach the parallel cable the correct way.
Problem is probably not with the drive belt. Read heads may need aligning - check the projects page for information.
|
|
All Site Contents are Copyright (c)2008-2010 Retro-Zone.Org unless stated otherwise. The copyright contents of this site MAY NOT be copied by anyone without the express written permission of the copyright holder. Certain aspects of this site are used with the copyright holders permission. These sections may not be copied without the content owners express permission (not retro-zone.org.) Look for information in the section. Other Sections of this site may be "Public Domain" and may be copied by anyone and hosted on their own sites, these sections will be clearly marked with the text 'NOTE: This Document is "Public Domain"' in GREEN. Retro-Zone.Org or the Author cannot accept responsibility for items uploaded with the permission of others in error. If you find anything on this site which contravenes copyright please inform me at ask@retro-zone.org and the offending content will be removed as soon as possible. |